Muratec MFX-C3400 All in One Printer User Manual


 
Operation > 87
(c) Press Enter.
Registering an F-Code Bulletin box
1. Press Bulletin Box.
(a) Enter a sub address using the numeric keypad.
(b) Press Enter.
2. Enter a box name:
(a) Press Box name.
(b) Enter a box name using the QWERTY keyboard.
(c) Press Enter.
3. If required, enter a password:
(a) Press Password.
(b) Using the numeric keypad enter a password.
(c) Press Enter.
4. If required, enable receive protect:
(a) Press Rx Protect.
(b) Press ON.
(c) Press Enter.
5. If required, enable concurrent print:
(a) Press Auto Print.
(b) Press ON.
NOTE
Retain period input range is between 0 and 31 days). When 0 is set,
documents are retained for an indefinite period.
NOTE
A sub address can be registered using up to 20 digits. Numbers, # and * can
be registered.
If you make a mistake when entering the digits, press the Clear button to
delete and then enter the correct digit.
NOTE
If using one-byte characters, up to 16 characters can be registered. If using
double-byte characters, up to 8 characters can be registered.
NOTE
Up to 20 digits of numbers, * and # can be used for a password.
Registering a password is optional.
The same password can be registered in other boxes.
NOTE
When Rx Protect is set to ON, only polling transmission is available.
When Rx Protect is set to ON, Auto Print and OverWrite features are disabled.