Filter
Top Products
Configuring Your Machine > 70
Automatic Redial
You can set the fax to automatically redial if the initial fax transmission fails. The machine
will redial on:
•Line busy
•No answer
• Communication error
To set auto-redial:
1. Press the Setup button on the control panel.
2. From the touch screen, press the Admin Setup button.
3. Using the on-screen keyboard, enter the administrator password and press Enter.
4. From the touch screen, press the Fax Setup button.
5. From the touch screen, press the Other Settings button.
6. From the touch screen, press the Redial Tries button.
7. Use the on-screen arrow buttons and keypad to enter the required redial attempts
(between 0 and 14), then press Enter.
8. From the touch screen, press the Redial Interval button.
9. Use the on-screen arrow buttons and keypad to enter the required redial interval
(between 0 and 5 minutes), then press Enter.
10. Press Close (on four screens) to store the new setting and exit the menu.
Reception Mode
You can change the way your unit handles incoming fax transmissions and telephone calls
(if you have a telephone handset connected) depending on your office requirements.
Choose from:
•Fax Ready Mode
• Tel/Fax Ready Mode
• Fax/Tel Ready Mode
• Ans/Fax Ready Mode
•Tel Ready Mode
To change the reception mode:
1. Press the Setup button on the control panel.
2. From the touch screen, press the Admin Setup button.
3. Using the on-screen keyboard, enter the administrator password and press Enter.
4. From the touch screen, press the User Install button.
5. From the touch screen, press the Reception Mode button.
6. Select the required reception mode and press Enter.
7. Press Close (on three screens) to store the new setting and exit the menu.