Filter
Top Products
Just in case …
What you see on the
LCD
What it means/What to do
Communication Error A communication error disrupted the reception
or transmission. If you were transmitting, press
STOP
to clear the error message and then re-try
the transmission. If you were receiving a fax, try
to contact the other person and have him/her re-
try the transmission. (The problem may be
entirely with his/her machine, phone line, etc.)
Copy Off You tried to use your fax machine to make a
copy, but the unit’s copy protection feature (page
1.31) is on, preventing such use. Turn off copy
protection.
Copying Not Completed You tried to switch to the fax mode by pressing
COPY
/
FAX
during copying from the multi paper
tray. Complete the copying first, then try again.
Dept. Code Full You tried to enter department code more than
100. Your machine can store up to 100 depart-
ment codes.
Document Full You tried to enter an document into an F-Code
box, but the machine has reached its capacity.
Delete documents stored in F-Code boxes until
the machine will let you proceed.
Document Jam An original document jam while you are using
ContStor Enter/Cancl the
ADF
for either faxing or copying. See page 3.1
for instructions on clearing the jam.
Document Stored You tried to erase a batch box which contains at
least one document. Erase the document(s), then
try again.
Drum Near End Your drum will need to be replaced soon.
Press
STOP
to clear the message, then contact
your authorized Muratec dealer to purchase a
new drum cartridge if you don’t already have
one.
Enter No. (0-32) You tried to enter a call group number greater
than 32. Your machine can maintain 32 call
groups, numbered 1-32 (call group 0 covers all
the groups). Determine the correct call group
identifier number and enter it, instead.
What you see on the
LCD
What it means/What to do
Enter No. (1-99) You tried to request greater than 99 copies from
your fax, which can create 1-99 copies of a docu-
ment. Select the correct quantity and enter it.
Enter Scan Size When you using the flatbed scanner (
FBS
), you
must manually enter the scan size of your docu-
ment. Press
BOOK DOC SIZE
to choose the size.
Feeder In Use The command you’re trying to enter requires the
use of the
ADF
, which is already in use. Wait for
the machine to stop using the
ADF
, then try
again.
Hang Up Phone The optional handset is off-hook.
Hang it up, making sure the upper part of the
handset presses down on the “hook” button.
In Relay Box You tried to store a document for polling in an
F-Code box which is set to be a relay box.
Select an F-Code box which is set to be a bulletin
box, then try again.
In Secure Box You tried to store a document for polling in an
F-Code box which is set to be a security box.
Select an F-Code box which is set to be a bulletin
box, then try again.
Insert Document There was no document in the document feeder
when you tried to send a fax or make a copy.
Place a document and try again.
Invalid I.D. Code The F-Code box
I
.
D
. code you entered isn’t valid.
Try re-entering your F-Code box
I
.
D
. code.
Invalid Number You pressed a key which has no function during
the current operation.
Invalid Passcode The protection passcode you entered isn’t valid.
Repeat the operation, entering the correct protec-
tion passcode.
Line Busy You tried to erase a document which someone is
polling from your machine. Wait for the fax to
complete the polling operation, then try again.
3.7