Filter
Top Products
Just in case …
5
Open the inner cover.
Important: You must hold the cover open. It won’t stay open by itself.
6
Use the cloth with the rollers cleaner to
clean the face of the rollers. Rotate the
rollers by hand to allow cleaning of the
entire roller surface.
7
Use the cloth with isopropyl alcohol to
clean the contact glass.
Important: You must hold the cover
open. It won’t stay open
by itself.
8
Gently close the scanner cover, making
sure both sides are snapped down
securely.
Cleaning the FBS
1
Open the book cover.
2
Get a soft, lint-free cloth and moisten it with isopropyl alcohol.
Important: Make sure the cloth doesn’t have any rough areas. Otherwise, it
could scratch the glass surface of the FBS.
3
Using the cloth, gently clean the glass
surface of the FBS and the white back-
ground area on the underside of the
book cover.
If you have unsatisfactory printout quality
Your machine automatically cleans its charger and transport roller, two items which
are very important to printout quality. So, if you notice poor printout quality
(whether on received faxes or on copies), it may mean that your machine requires
service. Review "Print quality problems" (pages 3.4-3.5), and see whether any of the
proposed solutions helps your machine. If none do, please call your authorized
Muratec dealer or call the Muratec Customer Support Center at (972) 364-3350.
Cleaning the LED print head
If you find your fax recipients complaining that the faxes you receive or copy image
quality are streaked, the LED print head may be dirty.
1
Turn off your fax machine.
2
Get a soft, lint-free cloth and moisten it
with isopropyl alcohol.
3
Open the top cover and then open the
printer cover.
Important: The fuser unit of orange
color becomes very hot.
Do not touch the fuser unit when you are cleaning the LED
print head.
4
Using the cloth, gently clean the LED print head.
Note: Do not use abrasive materials on the LED print head.
Storing the toner and drum cartridge(s)
Follow these guidelines when you store the machine’s toner and drum cartridges.
• Do not unpack a cartridge until you are ready to install it.
• Store cartridges at a constant temperature within a range of 23ºF to 95º F. (-5º to
35º C.), as well as a humidity range of 10% to 80%.
3.13