Muratec Series 41500E Fax Machine User Manual


 
Beyond the Basics
13
Press
START
.
If in step 10 you chose an immediate transmission, your fax machine begins dialing.
If you chose a delayed command, the machine shows “Reserved” on the
LCD
, indicat-
ing that it has stored the command in memory and will complete it later.
F-Code polling
1
Press
COM
-
OPTIONS
five times and then press
ENTER
.
2
Use the numeric keypad to enter the appropriate sub-address.
In this example, we’ve entered 123456.
Note: If you make a mistake, press
CANCEL
to erase the character, then
enter the correct number.
3
Press
ENTER
. The
LCD
shows:
Note: If this sub-address does not have a password, skip to step 5.
4
Use the numeric keypad to enter the password. In this example, we’ve
entered 654321.
5
Press
ENTER
. The
LCD
shows:
6
Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad. Do not press
START
.
7
What you do now depends upon when you want the polling to begin.
To have it begin now, skip to step 10.
To delay it, go on to step 8.
8
Press
COM
-
OPTIONS
,
ENTER
. The
LCD
shows:
9
Use the numeric keypad to enter the day and time when the polling should
begin, then press
ENTER
.
10
Press
START
.
If in step 7 you chose an immediate polling, your fax machine begins dialing. If you
chose a delayed command, the machine shows “Reserved” on the
LCD
, indicating that
it has stored the command in memory and will complete it later.
Delayed
Enter Time: 15/17:05
Enter Fax Number
_
Enter Password
654321_
Enter Password
_
Enter Sub-Address
123456_
Enter Sub-Address
_
2.47