Beyond the Basics
Reduction margin
Your fax machine’s reduction margin is measured in millimeters (mm). We’ll define
reduction margin by explaining how it’s used:
When a fax message enters your machine’s electronic brain, the machine measures
the message’s length and compares it to (a) the length of your selected paper plus
(b) the reduction margin you set. If the length of the incoming message is shorter
than (a) and (b) put together, your machine prints the message on just one sheet.
If it’s longer, your machine prints the message on more than one sheet.
Note: An Auto reduction setting and a reduction margin setting of 40mm will
print most incoming faxes as single pages. Try this combination first and
then, only if you have problems with it, select different settings.
Half-page reception
Half-page reception can conserve paper if some of the faxes you receive are half-
page, “memo-sized” messages. When activated, this feature tells the machine to
combine two of these half-page receptions onto a single sheet. Half-page reception
only combines half-page messages sent back-to-back during the same transmission.
It won’t combine two half-page faxes from separate transmissions.
Adjusting the print settings
1
Press /
PROGRAM
,
J
,0,2,
ENTER
. The
LCD
shows the current print
reduction rate:
2
Press or /
PROGRAM
until the reduction setting you want appears.
In this example, we’ve chosen 91%.
3
Press
ENTER
to save the setting. The
LCD
shows the current reduction margin:
4
Use the numeric keypad to enter the reduction margin you want. If
necessary, press or /
PROGRAM
to move the cursor. In this example,
we’ve chosen 38mm.
5
Press
ENTER
to save the setting. The
LCD
shows the current setting for
half-page reception:
6
Press or /
PROGRAM
until the setting you want appears. In this example,
we’ve chosen On.
7
Press
ENTER
to save the setting.
Image Rotation
When this feature is activated, incoming fax messages will be rotated automatically
to fit on the paper.
1
Press /
PROGRAM
,
J
,1,8,
ENTER
. The
LCD
shows:
2
Press or /
PROGRAM
until the setting you want appears. In this example,
we’ve chosen On.
3
Press
ENTER
to save the setting.
Rotate Rx :On
Program/Enter
Rotate Rx :Off
Program/Enter
Your
Fax
Machine
A
11"
8.5"
A
11"
8.5"
Half Page Recpt:On
Program/Enter
Half Page Recpt:Off
Program/Enter
Prnt Reduc Rate: 91%
Margin (00-85mm):38
Prnt Reduc Rate: 91%
Margin (00-85mm):40
Prnt Reduc Rate: 91%
Program/Enter
Prnt Reduc Rate:Auto
Program/Enter
2.3