Filter
Top Products
Beyond the Basics
Fax dialing with the Macro key
To dial a fax call using a Macro key:
1
Insert the document.
2
Press the Macro key in which you’ve stored the fax communication command.
3
Press
START
, if you have not registered
START
in the Macro key.
Your fax will perform the operation now, or at whatever time you programmed.
If you programmed this key to delay its operation, the
LCD
shows:
If you programmed this key to perform the operation immediately after you press it,
the
LCD
shows the number:
Erasing a Macro key
1
Press
MACRO PROGRAM
twice,
ENTER
. The
LCD
shows:
2
Press the Macro key (
MACRO
1 –
MACRO
3) you want to erase. Here, we’ve cho-
sen
MACRO
2.
3
Press
ENTER
. The
LCD
shows:
Important: If you want to quit without erasing the Macro key you’ve
selected, press /
PROGRAM
. The fax will return to step 2.
4
Press
ENTER
to erase the job.
To erase another Macro key, repeat steps 2–4. Or press
STOP
to return to standby
mode.
Printing a list of your Macro keys
Your fax machine can print a list of the Macro keys.
The list includes:
(1) each key’s Macro key number
(2) the name of the job stored in the Macro key
To print a list of Macro keys, press
MACRO PROGRAM
three times,
ENTER
.
Setting the speed for Macros
You can adjust the speed of one step in the Macro key.
1
Press
MACRO KEY
four times,
ENTER
. The
LCD
shows:
2
Press or /
PROGRAM
until the mode you want appears. The possible set-
tings are:
3
Press
ENTER
to save the setting.
Macro Speed :Fast
Program/Enter
Macro Speed :Slow
Program/Enter
Macro Speed :Norm
Program/Enter
Macro Speed :Norm
Program/Enter
Erase Macro
** Complete **
Erase Macro
Check Program/Enter
Select Macro Key
M2:Batch box list
Select Macro Key
M1:Activity journal
9-1-972-555-4335
A4 Normal
** Reserved **
Jan 29 2000 17:17
2.27