Filter
Top Products
1.31
Getting started
Setting of enlargement or reduction for copying
Your fax machine is capable of enlargement and reduction when copying.
Note: The copy enlargement and reduction rate setting is available only for copy-
ing, not for faxing.
Important: Copy enlargement is available only for copying using the
FBS
; it is not
available for copying using the
ADF
.
To change the reduction or enlargement rate for copying, either select a preset rate
or directly enter a rate.
Selecting a preset rate
Either . . .
• Press
ENLARGE
to select one of the following fixed enlargement rates.
200%
129% : Half-letter (5.5″ × 8.5″) → Letter (8.5″ × 11″)
100%
...or ...
• Press
REDUCE
to select one of the following fixed reduction rates.
78%: Legal → Letter
64%: Ledger (11″ × 17″) → Letter (8.5″ × 11″)
Directly entering a rate
Using the numeric keypad, directly enter the reduction or enlargement rate by
doing one of the following.
Either . . .
1
Press #.
2
Enter your desired rate using the numeric keypad. You can set any rate from
50% reduction through 200% enlargement.
3
Press # again.
...or ...
Press or to adjust the rate, at 1% intervals, from/including 50% reduction
through 200% enlargement.
Copy protection
With such a versatile copier built right into your fax machine, you might want to
make sure it doesn’t become too tempting to some people whose unauthorized copy-
ing could deplete your machine’s supplies more rapidly. So, to limit the use of your
fax machine to only sending and receiving faxes — in other words, to activate copy
protection:
1
If the machine is in Fax mode, skip to step 2.
Otherwise, press
COPY
/
FAX
to change to Fax mode.
2
Press
PROGRAM
,
J
,0,3,
ENTER
.
3
Press
PROGRAM
to turn on copy protection.
4
Press
ENTER
While this setting is active, whenever someone tries to change the machine to Copy
mode, the machine will sound a brief alarm tone and display:
Important: To turn off copy protection off so that you can again use the machine’s
copying function, repeat steps 2-4, above (step 1 is unnecessary since
the machine will be in Fax mode) except that, in step 3, you press
PROGRAM
so that the display shows:
Copy Protect :Off
Program/Enter
Fax Ready
Copy Off
Copy Protect
** Complete **
Copy Protect :On
Program/Enter
Copy Protect :Off
Program/Enter