Filter
Top Products
1.23
Getting started
Review Commands, an introduction
Your fax machine can store many “jobs” in its memory. And it keeps track of each one
by assigning it a command number, like “C01.”
Delayed commands, redial attempts and current fax transmissions are all stored in
your fax machine’s memory and given a command number.
The Review Commands function gives you the power to check on each job (or
command) in your machine’s memory. It also lets you cancel a command if you
decide not to send the document.
To cancel a command:
1
Press
REVIEW COMMANDS
.
The
LCD
shows the first command, indicated by its command number and the
phone number it will dial. If a command is in progress, that will be the first
command the
LCD
shows:
2
Press or /
PROGRAM
until the command you want to cancel appears.
3
Press
CANCEL
. The
LCD
shows:
4
If you want to cancel this command, press
CANCEL
again.
5
The
LCD
now shows the next command.
If you want to cancel it, too, go back to step 4.
If you don’t want to cancel this command but do want to review other
commands, press /
PROGRAM
until the command you want appears. Then go
back to step 4.
If you want to stop reviewing the stored commands, press
STOP
to return the
machine to standby mode.
For more information on the Review Commands function, see page 2.18.
C01:5552009
Check Program/Cancel
C01:5552009
Program/Cancel