Filter
Top Products
1.32
Getting started
Your fax machine can also be used as a phone, if you have an optional handset
installed. The following is a brief look at the machine’s telephone features.
Redial
Press
REDIAL
/
PAUSE
to redial the last number dialed on your machine.
Dialing with the monitor speaker
Because your machine has a monitor speaker, you can dial without picking up the
handset. For hands-free dialing:
1
Press
MONITOR
/
CALL
. You’ll hear a dial tone (unless you have set your speaker
volume to Off; see page 1.13), and the
LCD
shows:
2
Dial the number you want. Use either the numeric keypad, a one-touch key or
a speed-dial number to dial.
Note: Remember, your fax machine’s monitor speaker is not a speakerphone. If a
person answers the call, pick up the handset to speak.
Note: If the call fails, press
MONITOR
/
CALL
to hang up.
EasyDial directory dialing
The EasyDial directory feature is available for regular phone calls as well as fax calls.
Review the EasyDial instructions on page 2.15 for more information.
Checking the fax reception mode
While using an optional handset for your call, if you press
CLEAR ALL
, the
LCD
shows
the current fax reception mode. Press
CLEAR ALL
again to return to the
TEL
mode.
Dialing in the event of a power failure
Your fax machine can receive telephone calls even in the event of a power failure if
an optional handset is attached. But it cannot send or receive a fax document.
** Tel Mode **
_
Using your fax machine as a phone