Filter
Top Products
1.29
Getting started
Sort copy
Press
SORT COPY
to toggle (switch on or off) sorting copy if necessary.The initial set-
ting is Off.
How to copy
Copying using the
ADF
1
If necessary, press
COPY
/
FAX
to change to Copy mode.
Otherwise, proceed to step 2.
2
Prepare the document just as you would to send a fax.
Note: There are certain types of documents you never should insert into
your fax machine. (You might wish to review “Things
NOT
to put in
your fax,” page 1.17.)
3
Insert your document face up. Adjust the document guides for a correct fit.
When the document is correctly inserted, you’ll hear a short beep.
Note: Make sure that all the pages are the same size and thickness.
Do not attempt to feed documents of different size and thickness in
the same stack.
4
Adjust resolution and contrast if necessary.
Press
RESOLUTION
to change the resolution.
Press
CONTRAST
, then press or to change the contrast.
5
Set the reduction rate, if you want. (See “Setting of enlargement or reduction
for copying,” page 1.31.)
6
If you want to make only one copy of each page of the document, skip to step
9. Otherwise, proceed to step 7.
7
Use the numeric keypad to enter the desired number of copies for each page
in the document. You may choose one to 99 copies. Here, we’ve entered “3”to
choose a setting of three copies.
8
Press
SORT COPY
once or twice to “toggle” (switch on or off) the sorting of
copies, as desired.
9
Press
START
to begin the copying process.
Note: To stop the copying before it is through, press
STOP
.
Note: Thanks to your machine’s QuardAccess
®
feature (see page 2.37 for more),
copying doesn’t keep you incommunicado while in progress: you can start a
fax or voice call and even receive a voice call during copying.
When using the
FBS
1
If necessary, press
COPY
/
FAX
to change to Copy mode.
Otherwise, proceed to step 2.
2
Open the book-cover, place your document face down on the
FBS
and align it
with the scale on the right.
Note: Be sure that you place the original document on the
FBS
in the same
orientation as the paper in the paper source (which you’ll select in
step 4).
3
Gently close the book-cover.
4
Press
PAPER SIZE
? to select recording paper (see page 1.28).