Filter
Top Products
© National Instruments Corporation I-1 6023E/6024E/6025E User Manual
Index
Numbers
+5 V signal
description (table), 4-4
self-resetting fuse, C-1
82C55AProgrammable PeripheralInterface.See
PPI (Programmable Peripheral Interface).
6023E/6024E/6025E devices. See also hardware
overview; specifications.
block diagram, 3-1
features, 1-1 to 1-2
optional equipment, 1-5 to 1-6
requirements for getting started, 1-2 to 1-3
software programming choices, 1-3 to 1-5
National Instruments application
software, 1-3 to 1-4
NI-DAQ driver software, 1-4 to 1-5
unpacking, 2-1
using PXI with CompactPCI, 1-2
A
ACH<0..15> signal
description (table), 4-4
signal summary (table), 4-7
ACK* signal
description (table), 4-26
mode 1 output timing (figure), 4-28
mode 2 bidirectional timing (figure), 4-29
acquisition timing connections. See DAQ timing
connections.
AIGATE signal, 4-39
AIGND signal
analog input mode, 4-10
description (table), 4-4
signal summary (table), 4-7
AISENSE signal
description (table), 4-4
NRSE mode, 4-10
signal summary (table), 4-7
analog input
available input configurations (table), 3-3
common questions, C-2 to C-3
dithering, 3-4 to 3-5
input modes, 3-2 to 3-3
input range, 3-3
multichannel scanning
considerations, 3-5 to 3-6
analog input signal connections, 4-8 to 4-19
common-mode signal rejection
considerations, 4-19
differential connections, 4-13 to 4-16
ground-referenced signal sources, 4-14
nonreferenced or floating signal
sources,4-15to4-16
exceeding common-mode input ranges
(caution), 4-10
PGIA (figure), 4-10
recommended input connections
(figure), 4-12
single-ended connection, 4-17 to 4-19
floating signal sources (RSE
configuration), 4-18
grounded signal sources (NRSE
configuration), 4-18 to 4-19
summary of input connections (table), 4-12
types of signal sources, 4-8 to 4-9
floating signal sources, 4-9
ground-referenced signal sources, 4-9
analog input specifications
PCI and PXI buses, A-1 to A-4
accuracy information, A-2
amplifier characteristics, A-3