Filter
Top Products
Advanced Configuration
101
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
3. Click Apply to save your settings.
Configure the Optional DHCPv6 Server
The wireless access point provides a built-in DHCPv6 server for wireless clients only, which
can be especially useful in small networks. When the DHCP server is enabled, the wireless
access point provides preconfigured TCP/IP configurations to all connected wireless stations.
Note: For information about how to configure the DHCPv4 server, see
Configure the Optional DHCPv4 Server on page 27.
To configure DHCPv6 server settings:
1. Select Configuration
> IP > DHCP Server Settings. The DHCP Server Settings screen
displays. The following figure displays the DHCPv6 server settings only. For information
about the DHCPv6 server settings, see Configure the Optional DHCPv4 Server on
page 27.
Default Gateway Enter the IPv6 address of the ISP gateway to which the wireless access point
connects.
Dynamic IPv6 Address The dynamic IPv6 address that is assig
ned by the DHCPv6 server on your
network. This address does not overwrite the address in the IPv6 Address field.
Primary DNS Server
Enter the IP address of the primary and secondary DNS servers.
A DNS server is a host on the Internet that
translates Internet names (such as
www.netgear.com) to numeric IP addresses. Typically your ISP transfers the IP
address of one or two DNS servers to your wireless access point during login. If
the ISP does not transfer an address, you need to obtain it from the ISP and
enter it manually in this field.
Secondary DNS Server
Network Integrity Check Select this check box to vali
date that the upstream link is active before allowing
wireless associations. Ensure that the default gateway is configured.
Table 28. IPv6 settings (continued)
Setting Description