Filter
Top Products
Wireless Configuration and Security
58
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
To configure the RADIUS server settings:
1. Select Configuration > Security > Advanced > Radius Server Settings. The Radius
Server Settings screen displays.
Figure 30.
2. Specify the settings as explained in the following table:
Table 14. RADIUS server settings for IPv4 and IPv6
Setting Descriptions
Radius Server Settings
Primary
Authentication Server
IPv4 Address or
IPv6 Address
Enter the IP address of the primary RADIUS server for
aut
hentication.
Port Enter the number of the UDP port on the wireless access point
t
hat is used to access the primary RADIUS server for
authentication. The default port number is 1812.
Shared Secret Enter the shared key that is used between the wireless access
po
int and the primary RADIUS server during authentication.