Filter
Top Products
Management and Monitoring
65
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
Figure 34.
2. Specify the settings as explained in the following table:
3. Click App
ly to save your settings.
Table 16. SNMP settings
Setting Description
SNMP Select the Enable radio button to allow the SNMP network management
software, such as HP OpenView, to manage the wireless access point
through SNMPv1/v2 protocol. By default, the Disable radio button is
selected.
Read-Only Community Name Enter the community string to allow the
SNMP manager to read the
wireless access point’s Management Information Base (MIB) objects. The
default is public.
Read-Write Community Name Enter the community string to allow the SNMP manager to read and write
th
e wireless access point’s MIB objects. The default is private.
Trap Community Name Enter the community string to allow the SNMP
manager to send traps. The
default is trap.
IP Address to Receive Traps Enter the IP address of the SNMP manager to receive traps sent from the
wireless ac
cess point.
Trap Port Enter the number of the SNMP manager port to receive
traps sent from the
wireless access point. The default is 162.