Filter
Top Products
Advanced Configuration
120
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
e. If you want to enable wireless client association while the wireless access point
functions as a point-to-point bridge, select the Enable Wireless Client Association
check box.
f. Click Edit to configure the
security profile settings. The Edit Security Profile screen
displays:
Figure 69.
g. Specify the settings as explained in the following table:
Table 36. Point-to-point bridge profile and authentication settings
Setting Description
Profile Definition
Profile Name Enter a profile name that is easy to remember. The default name is
NETGEA
R-WDS-1.
Remote MAC Address Enter the MAC address of the remote wireless access point (the MAC address
of AP2 on LAN Seg
ment 1 in Figure 67 on page 119).
Authentication Settings
Network
Authentication and
Data Encryption
From the Network Authentication drop-down list, select Op
en System,
WPA-PSK, or WPA2-PSK. Your selection determines the options that the Data
Encryption drop-down list provides, and whether the WPA Passphrase
(Network Key) field displays.