Filter
Top Products
Wireless Configuration and Security
47
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
Form for 802.11a/an Modes
Print this page and store the security information in a safe place:
• SSID: T
he service set identifier (SSID) identifies the wireless local area network. You can
customize it by using up to 32 alphanumeric characters. Write your SSID on the line.
SSID: ___________________________________
The SSID in the wireless access point is the SSID you configure on
the wireless adapter
card. All wireless nodes in the same network need to be configured with the same SSID.
• WEP key
size and authentication
Choose the key size by circling one: 64, 128, or 152 bits.
Choose the authentication type by circling on
e: open system or shared key.
Passphrase: ___________________________________
Note: If yo
u select shared key, the other devices in the network cannot connect unless
they are set to shared key and have the same keys in the same positions as those in the
wireless access point.
• WP
A-PSK (pre-shared key) and WPA2-PSK
Record the WPA-PSK passphrase:
WPA-PSK passphrase: ________________________________
Record the WPA2-PSK passphrase:
WPA2-PSK passphrase: ________________________________
• WP
A RADIUS settings
For WPA, record the following settings for the primary and secondary RADIUS servers:
Server name/IP address: Primary ________________ Secondary _________________
Port: ___________________________________
Shared secret: ___________________________________
• WP
A2 RADIUS settings
For WPA2, record the following settings for the primary and secondary RADIUS servers:
Server name/IP address: Primary ________________ Secondary _________________
Port: ___________________________________
Shared secret: ___________________________________
------------------------------------------------
End of Form--------------------------------------------------------