Filter
Top Products
Advanced Configuration
115
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
Match Frame
Fields and Match
Classifications
(continued)
802.1P From the Match Classifications drop-down list, select the CoS priority
value against which the information in the IP header needs to be
matched:
• Routine(0)
• Priority(1)
• Immediate(2)
•Flash(3)
• Flash Override(4)
•Critic/CCP(5)
• Inter Control(6)
• Network Control(7)
IP Protocol In the Match Classifications field, enter th
e IP protocol value against
which the information in the IP header needs to be matched. A list of
protocol values is available at
http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xml.
Ether Type In the Match Classifications field, enter the Ether type value against
which the information in the IP header needs to be matched. A list of
Ether type values is available at
http://standards.ieee.org/deve
lop/regauth/ethertype/eth.txt.
Source MAC In the Match Classifications field, select or enter the source MAC
address against which the information in the IP header needs to be
matched.
To select the MAC address of a wireless cl
ient that is connected to the
wireless access point:
1. Select the radio button to the left of the Match Classifications
drop
-down list.
2. From the drop-down list, select a MAC address.
To enter a MAC address:
1. Select the radio button to the right of the Match Classifications
drop
-down list.
2. In the field to the right of the ra
dio button, enter a MAC address.
Destination
MAC
In the Match Classifications field, select or enter the destination MAC
address against which the information in the IP header needs to be
matched.
To select the MAC address of a wireless cl
ient that is connected to the
wireless access point:
1. Select the radio button to the left of the Match Classifications
drop
-down list.
2. From the drop-down list, select a MAC address.
To enter a MAC address:
1. Select the radio button to the right of the Match Classifications
drop
-down list.
2. In the field to the right of the ra
dio button, enter a MAC address.
Table 33. QoS classification settings (continued)
Setting Description