Filter
Top Products
Troubleshooting
138
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
Use the Packet Capture Tool
You can capture wireless packets to analyze traffic patterns with a network traffic analyzer
tool. The captured packet flow can show if traffic is flowing correctly to its destinations or if
packets are dropped. There is a limit to the size of the packet flow that you can capture in a
file.
To capture packets:
1. Select Mon
itoring > Packet Capture. The Packet Capture screen displays:
Figure 76.
2. Click Start to start capturing wireless packets leaving or entering the wireless access point
on the active operating channel. Depending on which interface is enabled, packets on the
2.4 GHz interface or 5 GHz interface are captured. Normal functioning of the wireless
access point is not affected during the packet capture process.
If any previously captured packets exist, you a
re prompted to delete them, and only then
can you capture new packets.
3. Click St
op to stop capturing packets.
4. Click Save as to save the p
acture.pcap file on your computer or to a disk drive.