Filter
Top Products
Introduction
12
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
Figure 1.
Table 1. Top panel LEDs
Item LED Description
1 Power/Test Off Power is off.
On (green) Power is on.
Amber, then blinking
gree
n
A self-test is running or software is being loaded.
During startup, the LED is first steady amber, then
goes off, and then blinks green before turning steady
green after about 45 seconds. If after 1 minute the
L
ED remains amber or continues to blink green, it
indicates a system fault.
2 Active Off No Ethernet traffic is detected, or no link is detected.
On or blinking (green) Ethernet traffic is detected.
3 LAN Off 10 Mbps or no link is detected.
Amber 10/100 Mbps link is detected.
Green 1000 Mbps link is detected.
4
2.4
Ghz
WLAN Off Wireless 802.11b/g/n (2.4 GHz) LAN is not ready, or
no wireless activity is detected.
On or blinking (green) Wireless 802.11b/g/n (2.4 GHz) LAN is ready, or
wireless activity
is detected.
5
5
Ghz
WLAN Off Wireless 802.11n/a (5 GHz) LAN is not ready, or no
wireless activity is detected.
On or blinking (green) Wireless 802.11n/a (5 GHz) LAN is ready, or wireless
ac
tivity is detected.
1
23
4
5