Filter
Top Products
Installation and Basic Configuration
24
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
2. Configure the settings as explained in the following table:
3. Click Apply
to save your settings.
To configure time settings:
1. Select Confi
guration > System > Basic > Time. The Time screen displays:
Figure 12.
2. Configure the settings as explained in the following table:
Table 2. Basic general system settings
Setting Description
Access Point Name This unique name is the wireless access poi
nt NetBIOS name. The name is printed
on the rear label of the wireless access point. The default is netgearxxxxxx, in which
xxxxxx represents the last 6 digits of the wireless access point MAC address. You
can replace the default name with a unique name up to 15 characters long. The
access point name can be retrieved through SNMP.
Country / Region From the Country / Region drop-down list, sele
ct the country where the wireless
access point is installed.
Note: It might not be legal to operate this wireless access point in a region other than
one
of those identified in this field.
Table 3. Time system settings
Setting Description
Time Zone Select the time zone to
match your location.
Current Time This is a nonconfigurable field that
displays the current date and time.