Filter
Top Products
Management and Monitoring
94
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
To enable and configure the IDS/IPS:
1. Select Configuration > IDS/IPS. The IDS/IPS screen displays:
Figure 54.
2. Select the Enable radio button. By default, the IDS/IPS is disabled.
3. S
pecify the detection policy by making a selection from the IDS/IPS Detection Policy
drop-down list:
• Mild. The wireless acce
ss point scans for attacks every 10 seconds.
• Mod
erate. The wireless access point scans for attacks every 5 seconds. This is the
default setting.
• Aggressive. The wireless acce
ss point scans for attacks every second.
4. Option
al: Click a policy name to display the policy rules that are stated next to the policy in
the table. IDS/IPS policy rules are not configurable.
5. Option
al: Clear check boxes for policies that you want to disable. By default, the check box
next to Select Policy in the table heading is selected, and all IDS/IPS policies are enabled.
6. Click Apply to save
your settings.