NETGEAR WNDAP620 Network Router User Manual


 
Management and Monitoring
82
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
The following table explains the fields of the Wireless Stations Details screen:
Table 20. Wireless stations details fields
Setting Description
MAC Address The MAC address of the wireless station.
BSSID The BSSID that the wireless
station is using.
SSID The SSID that the wireless station is using.
Channel The channel that the wireless station is using.
Rate The transmit data rate in Mbps of the wireless station.
State The features that are enabled on the wireless station.
Type The authentication and encryption type th
at the wireless station is using.
AID The associated identifier (AID) of the wireless station.
Mode The wireless mode in which the
wireless station is operating.
Status The wireless status of the wireless station (Associated).
RSSI The received signal strength indicator (RSSI) of the wireless station.
Idle Time The time since the last frame was received from the wireless station.
Tx Sequence The sequence number of the last frame that wa
s transmitted to the wireless station.
Rx Sequence The sequence number of the last frame that was received from the wireless station.
Capability The summary of the capability of the wirele
ss station that was detected during
association.
Cipher The cipher that the wireless station is using and that defines the type of encryption.
SNR The signal-to-noise ratio (SNR) that indicates how much the signal of the wireless
st
ation has been corrupted by noise.
Recv. Bytes The number of bytes received on the wireless st
ation since it last started up.
Trans. bytes The number of bytes transmitted by the w
ireless station since it last started up.
Assoc. Time Stamp The time when these details of the wireless station were retrieved.
IP Address The IP address of the wireless station.
Channel Width The channel width at which the
wireless station operates.