Filter
Top Products
Command-Line Reference
147
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
| | |-send-notifications --Administrator/superuser mail address
| |
| |-interface> --Select wireless lan interface
| | |-wlan> --Wireless LAN interface setting
| | | |-2.4GHz> --2.4 GHz wireless LAN interface setting
| | | | |-aggregation-length --Aggregated packet size
| | | | |-ampdu --Aggregated MAC Protocol Data Unit
| | | | |-beacon-interval --Wireless beacon period in TU(1024 us)
| | | | |-channel --Wireless channel (depends on country and wireless mode)
| | | | |-channelwidth --Wireless channel width
| | | | |-dtim-interval --Wireless DTIM period in beacon interval
| | | | |-fragmentation-length --Wireless fragmentation threshold(even only)
| | | | |-guardinterval --Interval (from interference from other transmissions)
| | | | |-knownap-add --Add known access point
| | | | |-knownap-del --Delete known access point
| | | | |-macacl-add --Add wireless access control (ACL)
| | | | |-macacl-database --Delete wireless access control (ACL) database
| | | | |-macacl-del --Delete wireless access control (ACL)
| | | | |-mcsrate --Transmit data rate
| | | | |-mode --Enable wireless access control (ACL)
| | | | |-operation-mode --Wireless operation mode
| | | | |-power --Wireless transmit power
| | | | |-preamble --Wireless preamble (only effect on 802.11b rates)
| | | | |-radio --Enable wireless radio
| | | | |-rate --Wireless transmission date rate
| | | | |-rifs-transmission --Enable successive frame transmission at different
| | | | | transmit powers
| | | | |-rogue-ap-detection --Enable rogue access point detection
| | | | |-rts-threshold --Wireless RTS/CTS threshold
| | | | |-11dSupport --IEEE802.11d status
| | | | |-client-isolation --Client isolation status
| | | | |-create-qos-policy --Create QoS (Quality of service) policy
| | | | |-create-qos-classification --Create Qos (Quality of service) classification
| | | | |-delete-qos-policy --Delete QoS (Quality of service) policy
| | | | |-delete-qos-classification --Delete Qos (Quality of service) classification
| | | | |
| | | | |-security-profile> --Create security profile
| | | | | |-1> --1st security profile
| | | | | | |-authentication --Wireless authentication type
| | | | | | |-encryption --Data encryption
| | | | | | |-hide-network-name --Hide network name
| | | | | | |-key1 --Wireless wep key 1
| | | | | | |-key2 --Wireless wep key 2
| | | | | | |-key3 --Wireless wep key 3
| | | | | | |-key4 --Wireless wep key 4
| | | | | | |-keyno --Key number
| | | | | | |-name --Profile name
| | | | | | |-presharedkey --Pre-shared key
| | | | | | |-security-separation --Disable associated wireless client communication
| | | | | | |-ssid --Network name (1-32 chars)
| | | | | | |-status --Profile status
| | | | | | |-vlan-id --VLAN id
| | | | | | |-wep-pass-phrase --Wireless wep passphrase key
| | | | | | |-wepkeytype --Wireless wep key type
| | | | | | |-apply-incoming-QoSpolicy --Apply QoS policy as a incoming
| | | | | | |-apply-outgoing-QoSpolicy --Apply QoS policy as a outgoing
| | | | | | |-delete-incoming-QoSpolicy--Delete incoming QoS policy