Filter
Top Products
108
Safety Information
Installation Hints
• ·Install your machine in a dust-free location away from direct
sunlight.
• ·Do not plug your machine into a power source shared by
equipment which produces electrical noise (i.e., air condi-
tioners, etc.).
• ·Leave electronic adjustments to authorized service person-
nel.
• ·The LINE terminal connects your fax machine to a standard
telephone line. To avoid damage to your telephone system or
to the machine, do not plug your fax machine into anything
other than a standard RJ-11C jack.
• ·Your machine is intended to be grounded electrically and is
equipped with a three-wire grounded power cord. For your
safety, do not attempt to defeat your power cord’s grounding
plug.
• ·The power outlet should be located near the equipment and
should be easily accessible.
• ·The TEL port on the back of the unit is only suitable for 2-
wire devices. Not all standard telephones will respond to
incoming ringing when connected to an extension socket.
• ·This equipment may not necessarily provide for the effec-
tive hand-over of a call from a telephone connected to the
same line.
Operation and Maintenance
• ·Use a dry cloth to clean the control panel and the main body
of the unit.
• ·Aside from replacing the toner and image drum cartridge,
do not disassemble or attempt to service this unit yourself.
Refer to a qualified technician for service.
• ·Disconnect the power cord before trying to remove any
objects that may have fallen into the machine.
• ·When relocating your machine, always disconnect the tele-
phone line before disconnecting the power cord, then recon-
nect the power cord first.
• ·This unit is not intended to be used in parallel with any other
telephone devices.
• ·If anything happens that indicates that the machine is not
working properly or has been damaged, unplug it immedi-
ately and follow the instructions in “Service and Support” to
have your machine serviced.
• These are some of the things to look for:
• -The power cord or plug is frayed or damaged.
• -Liquid has been spilled into the printer, or it has been
exposed to water.
• -The machine has been dropped, or the cabinet is damaged.
• -The machine does not function properly when you’re fol-
lowing the operating instructions.