Filter
Top Products
33
1. Press the Select Function key, then press the 8/Location
Prog.
One-Touch key. The display shows LOCATION
PROGRAMMING
.
2. On the numeric keypad, press the
# key. The display shows
GROUP SETTING.
3. Using the numeric keypad, enter the group number (01 - 20)
you want to program.
4. The display shows the number of your current group and
SELECT LOC.(S). You can now add a location to your group
(or delete a location from it). Refer to the instructions below.
5. After you have completed your selection (by pressing
YES
or
NO), the display again shows SELECT LOC.(S). Continue
to add or delete locations from your group. Each group can
contain up to a maximum of all of the One-Touch and Auto
Dial locations available on your fax machine.
6. When you are finished programming your group, press the
NO key. The display shows LOCATION PROGRAMMING.
7. To program another group, go back to Step 2. If you are
finished, press the
Select Function key.
To Do This Use
Add a One-Touch location Press the One-Touch key. Press START to add it to the
group.
Add Auto Dial location Press Auto Dial. Enter the 3-digit Auto Dial number.
Press START to add it to the group.
Delete One-Touch location Press the One-Touch key. Press START to delete it
from the group.
Delete Auto Dial location Press the Auto Dial key. Enter the 3-digit Auto Dial
number. Press START to delete it from the group.
Search for a location name
to add or delete
Press the Search key continuously until by the location
you want appears. Press START to add it to the group.
Press START to delete it.