Filter
Top Products
87
• Default: ON
Adds the sender ID to the main body of images scanned by
Internet Fax.
This setting will always apply when using Internet Fax, regard-
less of the setting for 4:SYSTEM DATA PRG. When using
Internet Fax as an email scanner, turn this setting OFF to pre-
vent the sender ID data from appearing in scanned images.
Send File Format
• Settings: TIFF or PDF
• Default: TIFF
This determines whether the format sent is either PDF or TIFF.
Note: Oki facsimile machines cannot receive PDF faxes.
Send Notification
• Settings: ON or OFF.
• Default: ON
When sending an email from the I-Fax device, the body of the
email has a message which indicates that an attachment is
included. The message varies, depending on the setting of Send
File Format (TIFF or PDF).
I-Fax NIC Update
• Settings: YES or NO.
• Default: YES
This setting allows updates to the firmware when YES is
enabled. Usually this option is not required except when a
firmware update is released and run from a client machine.
POP Interval
• Settings: Off/1min/5min/10min/30min/60min/Daily
• Default: OFF
POP Interval can be accessed using the following:
1. Press Select Function to enter the menu.
2. Press
9/USER PROG to enter the programming menu and
then press keypad
8 for I-FAX NIC OPTIONS.
3. Press to enter
I-FAX NIC OPTIONS.
4. Press until
POP INTERVAL appears.
5. Press to enter POP Interval.
6. Select either
YES or NO to select the interval time desired.
This determines how often the machine will check for incoming
transmissions from the POP mailbox. Select the option desired.
OFF sets the machine to not check for incoming transmissions.
SELECT
FUNCTION
USER
PROG.
9/OP
TUV
8
8:I-FAX NIC OPTIONS
YES ( ) NO( /1-9)
YES
NO
YES
NO
YES