Filter
Top Products
41
4. Adjust the paper guides on the manual paper feeder.
5. Insert a sheet of paper face up, adjusting the guides again to
ensure the paper is straight.
6. Press the
COPY key.
Note: It is recommended to make single copies only when using
the manual paper feed slot. This will prevent any possible
paper feed jams from occurring.
Using Voice Request
The voice request feature allows you to have a conversation with
a person at a remote fax machine during a fax communication.
Either the sender or receiver can initiate a voice request.
If you are sending a fax, you can answer a voice request only
after all pages have been transmitted. If you are receiving a fax,
you can answer a voice request after reception of each page. You
will know if the person on the other fax machine has issued a
voice request when you hear a warbling tone. If you do not
respond in approximately six seconds, the voice request is
automatically cancelled.
Note: You need to have either an attached handset or an
external telephone to use the voice request function.
With the ITU-T V.34 modem, this feature can’t be used.
This function can only be used during Feeder-TX.
Initiating Voice Request
1. During a fax communication, press the Hook/V. Request
key.
2. When the other party answers your request, your fax
machine will emit a repetitive warbling sound. The display
shows
LIFT HANDSET AND PRESS VOICE REQUEST.
3. Lift your handset and press the
Hook/V. Request key.
Note : If you press your Hook/V. Request key to initiate a voice
request during transmission, but no one is there to answer,