Filter
Top Products
27
Setting Forwarding Number
When the answering mode of your fax machine is set to Fax
Forwarding [FWD], it will receive fax messages into memory
and then automatically resend the faxes to the number which you
enter here.
1. Press the Select Function key.
2. Press the
9/User Prog. One-Touch key. The display shows
1:FUNC.PROGRAMMING.
3. Using the numeric keypad, press
6. This display shows
6:FORWARDING NO. PRG.
4. Press the
YES key. The display will show FORWARDING NO.
5. Enter the fax number to which you want your messages
forwarded.
6. Press the
Start key to save your entry.
7. Press the
Select Function key to finish.
Setting Language
Your fax machine comes with some languages (English and
other) installed, which appear on the display and in reports.
Follow the instructions below to switch languages.
Note: Your dealer may be able to provide you with additional
languages.
1. Press the Select Function key.
2. Press the
9/User Prog. One-Touch key. The display shows
1:FUNC.PROGRAMMING.
3. Press the
YES key. The display shows FUNCTION NO. [ ].
4. Using the numeric keypad, enter 14. The display shows
14:USER LANGUAGE.
5. Press the
NO key to switch to the other installed language.
To do this Use
Enter Numbers Numeric keypad. Press once for each number
required.
Enter Spaces Space One-Touch key
Enter Hyphens Hyphen One-Touch key
Enter Pause (i.e., to wait for
long distance or outside
lines)
Pause One-Touch key
SELECT
FUNCTION
USER
PROG.
9/OP
MNO
6
FORWARDING NO.
YES
Add a switch from pulse to
tone dialing for part of the
call
*/Tone key
Move the cursor to make
corrections
YES and NO keys.
To do this Use
SELECT
FUNCTION
USER
PROG.
9/OP
1
14: USER LANGUAGE
[ENG.] YES ( ) NO ( )
YES
GHI
4