Filter
Top Products
88
Daily
Daily sets the machine to check the mail server once a day.
Thus, it is required that the time of day is set for this option.
– When the DAILY setting is selected, the time of day when the
mailbox is polled requires setting. There are four different time
settings available.
– If the
POP INTERVAL TIME is not registered, then the auto POP
receiving action will not occur.
– After
POP INTERVAL TIME is registered, even if the setting is
changed from
DAILY to another one, the POP INTERVAL TIME
setting will not be lost.
Network Settings
This function modifies these network settings. The I-Fax Net-
work settings can be accessed using the following:
1. Press
Select Function to enter the menu.
2. Press
9/USER PROG to enter the programming menu and
then press keypad
8 for I-FAX NIC OPTIONS.
3. Press to enter
I-FAX NIC OPTIONS.
4. Press until
NETWORK SETTINGS appears.
5. Press to enter
NETWORK SETTINGS.
6. To advance to each function within Network Settings, use
the
Start key.
7. To set each function, utilize both the numeric keypad and the
one-touch keys for easy access to commonly used symbols.
An explanation for each option listed below follows.
– “IP Address” on page 88
– “Subnetmask” on page 89
– “Default Gateway” on page 89
– “SMTP Server Name” on page 89
– “POP Server Name” on page 89
– “Pop User Id” on page 90
– “Pop Password” on page 90
– “DNS P.SRV Address” on page 91
– “DNS S.SRV Address” on page 91
– “FAX Email Address” on page 91
IP Address
Sets the IP address.
POP INTERVAL
[DAILY] YES ( ) NO( )
YES
POP INTERVALTIME
[TIME1] YES ( ) NO( )
YES
POP INTERVALTIME
[__:__] PRG. TIME 0-9
SELECT
FUNCTION
USER
PROG.
9/OP
TUV
8
8:I-FAX NIC OPTIONS
YES ( ) NO( /1-9)
YES
NO
YES
NO
YES