Panasonic WJ-SX150A Switch User Manual


 
100
(Save Exit) button
Saves the configuration and closes the Multiplexer Mode
window.
(Cancel Exit) button
Cancels the configuration and closes the Multiplexer Mode
window.
Mux Alarm Group
This is a submenu of the Multiplexer window. In this win-
dow, up to 4 cameras are given recording priority for each
alarm input.
Click a drop-down menu to assign the camera numbers
(1 to 16) to each alarm group (Group1 to 16). The facto-
ry default setting is same as the illustration.
To configure Group 9 to 16, click on the Group 9
Group 16 tab.
(Save Exit) button
Saves the configuration and closes the Mux Alarm Group
window.
(Cancel Exit) button
Cancels the configuration and closes the Mux Alarm Group
window.
Multiplexer Title
How to Display
To display this window, click on the (Multiplexer Title)
button in the main window (p. 80.)
Parameters
The factory default settings are same as the illustration.
To edit the desired cameras title, click on the associated
button (Cam 1 to Cam 16).
The subsequent editing procedure is the same as Camera
Title. (Refer to p.94.)
Notes:
The characters available here are the following:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrs
tuvwxyz0123456789!"#$%&'()*+,-
./:;¨=Æ?oÄÜÖÆÑÃØäüöæñãø
Up to 8 alphanumeric characters are available for the
Multiplexer board camera title.
You cannot edit a user font character.
(Save Exit) button
Saves the configuration and closes the Multiplexer Title win-
dow.
(Cancel Exit) button
Cancels the configuration and closes the Multiplexer Title
window.
MUX