Filter
Top Products
114
■ Tour Sequence
The following functions are available if a tour sequence has
been previously configured through SETUP MENU or WJ-
SX150A Administrator Console. Any tour sequence can be
assigned to any monitors.
1. Select the desired monitor and camera. (Refer to p. 106
Monitor Selection and p. 107 Camera Selection.)
2. To select the desired tour sequence number, press the
numeric buttons.
3. When you have selected a wrong number, press the
CLEAR button to clear the numeric input.
4. Press the TOUR SEQ button to run the tour sequence in
the forward direction on the active monitor.
8. Press the PREV button to move the sequence one
frame to the previous step from the step that was previ-
ously paused by pressing the PAUSE button.
9. Press the STOP button to stop a tour sequence on the
active monitor and return to spot monitoring.
■ Group Sequence
The following function is available only if a group sequence
has been previously established in WJ-SX150A
Administrator Console.
As described earlier, a group sequence determines the
assignment of monitors and cameras. Therefore, monitor
selection is not required.
1. Press the numeric buttons to select a desired group
sequence number.
2. When you have selected a wrong number, press the
CLEAR button to clear the numeric input.
3. Press the GROUP SEQ button to run a group sequence
forward on the assigned monitors.
4. Press the PAUSE, NEXT or PREV button to operate the
group sequence. Refer to Step 5 to 8 of Tour Sequence
in this page for how to use these buttons.
5. To stop the sequence, select one of the monitors that
are being run on the selected group sequence, then
press the STOP button.
Note: If an alarm is activated during a sequence pause, the
sequence runs again after the unit recovers from the
alarm mode.
RUNNING SEQUENCE
SETUP
SHIFT
REW/FF
STEP
CALL
PRESET
PROGRAM
PRESET
GROUP SEQ
PAUSE
SUSPEND
F1
CAM SETUP
ALL RESET
ACK RESET
F2
TOUR SEQ
PREV NEXT
STOP
OSD
AUTO PAN
RECORDER
INDEX
STOP PLAY PAUSE
CAM FUNC
CLEAR
LOG OUT
MON LOCK
DEF ON
WIPER
DEF OFF
MON (ESC)
T&D CAM ID
MON STATUS
ALL
EVENT
ALM H VLD H SYS S
CAM (SET)
MULTI SCREEN SEL
SEQUENCE
AUX2 ONAUX2 OFF
EL-ZOOM
AUX1 ONAUX1 OFF
STILL
5. Press the PAUSE button to pause a tour sequence on
the active monitor.
The "P" sign (indicating the pause status) is displayed
at the tour sequence number on the active monitor, and
a camera number currently selected appears on the
LED display.
6. Press the PAUSE button to restart a tour sequence for-
ward from the next step that was previously paused by
pressing the PAUSE button.
7. Press the NEXT button to move the sequence one
frame to the next step from the step that was previously
paused by pressing the PAUSE button.
SETUP
SHIFT
REW/FF
STEP
CALL
PRESET
PROGRAM
PRESET
GROUP SEQ
PAUSE
SUSPEND
F1
CAM SETUP
ALL RESET
ACK RESET
F2
TOUR SEQ
PREV NEXT
STOP
OSD
AUTO PAN
RECORDER
INDEX
STOP PLAY PAUSE
CAM FUNC
CLEAR
LOG OUT
MON LOCK
DEF ON
WIPER
DEF OFF
MON (ESC)
T&D CAM ID
MON STATUS
ALL
EVENT
ALM H VLD H SYS S
CAM (SET)
MULTI SCREEN SEL
SEQUENCE
AUX2 ONAUX2 OFF
EL-ZOOM
AUX1 ONAUX1 OFF
STILL