Filter
Top Products
112
■ Camera Panning Function
There are three panning modes available as follows: auto
pan, sort mode and sequence mode. Refer to p. 16
Camera-related Functions for details on each mode.
1. Select the desired monitor and camera. (Refer to p. 106
Monitor Selection and p. 107 Camera Selection.)
2. Press the AUTO PAN button four times while holding
down the SHIFT button.
"PAN" will appear on the LED display of the controller as
shown in the figure.
4. To exit from the mode, press the MON (ESC) button,
then press the AUTO PAN button while holding down
the SHIFT button.
SETUP
SHIFT
REW/FF
STEP
CALL
PRESET
PROGRAM
PRESET
GROUP SEQ
PAUSE
SUSPEND
F1
CAM SETUP
ALL RESET
ACK RESET
F2
TOUR SEQ
PREV NEXT
STOP
OSD
AUTO PAN
RECORDER
INDEX
STOP PLAY PAUSE
CAM FUNC
CLEAR
LOG OUT
MON LOCK
DEF ON
WIPER
DEF OFF
MON (ESC)
T&D CAM ID
MON STATUS
ALL
EVENT
ALM H VLD H SYS S
CAM (SET)
MULTI SCREEN SEL
SEQUENCE
AUX2 ONAUX2 OFF
EL-ZOOM
AUX1 ONAUX1 OFF
STILL
3. Press the assigned numeric button shown below to acti-
vate the panning function of the selected camera.
The LED display indicates the selected mode as fol-
lows.
1: Activates AUTO PAN "PA PA".
2: Activates SORT PAN "PA SO".
3: Activates SEQUENCE PAN "PA SE".
Note: The AUTO MODE parameter previously set in the
camera's SETUP MENU will be automatically
replaced to the activated function parameter.