Filter
Top Products
8. To cancel the zooming, press the button 4 while holding
down the SHIFT button again.
Note: Still picture is not available while zooming is acti-
vated.
Note: When a WJ-HD100 Series recorder or a Panasonic
time-lapse VCR is connected to the unit, recording sta-
tus will appear on the monitor in the recorder mode.
When the normal recording is activated, “REC” will
appear on the monitor. When the alarm recording is
activated, “REC ALM” will appear.
121
● Still Playback Spot Picture
The playback spot picture can be changed into the still pic-
ture.
Note: To use this function, you need to connect a WJ-
HD100 Series recorder or time-lapse VCR to the unit.
1. Enter the recorder mode. (Refer to Multiscreen
Segment Switching.)
2. Press the PLAY button. (Refer to p. 131 Normal
Playback.) The system will enter the playback mode.
3. Select a camera channel by pressing a numeric button
and then pressing the CAM (SET) button. The selected
camera image will be displayed in a spot picture.
4. Press the button 1 while holding the SHIFT button. The
selected camera image will change into the still picture.
5. To cancel the still picture, press the button 1 while hold-
ing down the SHIFT button again.
Notes:
• Still picture is not available while zooming is activat-
ed.
• Even when still picture is displayed, the playback of
the recorder/time-lapse VCR continues.
● Electronic Zooming (EL-ZOOM)
The playback spot picture can be electrically zoomed.
Note: To use this function, you need to connect a WJ-
HD100 Series recorder or time-lapse VCR to the unit.
1. Enter the recorder mode. (Refer to p. 120 Multiscreen
Segment Switching.)
2. Press the PLAY button. (Refer to p. 131 Normal
Playback.) The system will enter the playback mode.
3. Select a camera channel by pressing a numeric button
and then pressing the CAM (SET) button. The selected
camera image will be displayed in a playback spot pic-
ture.
4. Press the button 4 while holding down the SHIFT but-
ton.
“+” sings will appear on the image.
5. To move the “+” signs within the picture, move the joy-
stick.
6. Press the button 4 while holding down the SHIFT but-
ton. The area surrounded by the “+” signs will be
zoomed up.
7. To move the zoom area, move the joystick.
REC
REC ALM