Filter
Top Products
Security
11-53980-A2-GB30-20 November 1996
To enter your Administrative Password from
Set_Access_Ctrl, make the following selections:
F1
Security >
Set_Access_Ctrl
F2
F3
Select Set_Access_Ctrl from the Security branch.
F1
Admin Password?
Entą
Ą
"00000000
F2
F3
The
Administrative Password appears. This occurs
every time you enter the Security branch.
Select the F2 ("
) key to increment password values.
Press the
key to move the cursor to the next
position.
Continue this sequence until the full Administrative
Password value appears and then press Ent.
F1
Set Access Ctrl >
Edit PassWd Table
F2
F3
If the correct value is entered, the
EditPassWdTable group appears on the LCD.
Press the
key to scroll the Set Answer Security, Set
Originate Security, and Set Administrative Password
groups into view.
If an incorrect administrative password is entered, then
the message
PassWrd Invalid
appears as well as the last
password entered. Enter the correct password value or
press the
or key to exit the Security branch.
EditPasswdTable
The Password Table is the modem’
s security database.
It contains all essential information for each password
stored in the modem’s nonvolatile memory. The
information associated with each password is known as a
record. Records are identified by an index which is a
numeric name for a single record. A password’
s record is
retrieved by entering its index.
The Edit Password Table group allows you to view
and/or change the modem’
s security database table. T
o do
this, you must retrieve a password’
s records by selecting
its index. (See Select Index
section, below
.)
The Edit Password T
able group consists of the
following options: Select Index, Password Type, Edit
Password, and Save Edit.
T
o access EditPasswdT
able from Set Access Ctrl, make
the following selections:
F1
Set Access Ctrl >
Edit PassWd Table
F2
F3
Select EditPassWdTable.
Select Index
Select Index allows a specific record to be retrieved.
Index addresses range from 0001 to 0020 for all 3800Plus
modems and from 0001 to 3000 for a 3811Plus with
Extended Security. The contents of this record can be
viewed, edited, and saved.
T
o access Select Index, make the following selections:
F1
Set Access Ctrl >
Edit PassWd Table
F2
F3
Select EditPassWdTable.