Filter
Top Products
B-13980-A2-GB30-20 November 1996
Result Codes
Overview
Table
B-1 lists all the result codes 3800
Plus
modems
may send to the DTE. Result codes can be numeric or
verbal, terse or extended. See the Qn
, V
n
, and
Xn commands in Chapter 13 for more information.
Table B-1
(1 of 3)
Result Codes
Numbers (1)
Numbers (2) Word Description
0 0 OK Command executed
1 1 CONNECT Modem connected to line
2 2 RING Modem receiving a ring voltage from the VF line
3 3 NO CARRIER Modem lost or does not detect carrier signal, or
does not detect answer tone
4 4 ERROR Invalid command
5 5 CONNECT 1200* Connection at 1200 bps
6 6 NO DIALTONE* No dial tone detected
7 7 BUSY* Busy or trunk busy signal detected
8 8 NO ANSWER* No ‘‘quiet” answer (@)
10 10 CONNECT 2400* Connection at 2400 bps
11 11 CONNECT 4800* Connection at 4800 bps
12 12 CONNECT 9600* Connection at 9600 bps
13 16 CONNECT 12000* Connection at 12,000 bps
14 13 CONNECT 14400* Connection at 14,400 bps
15 14 CONNECT 19200** Connection at 19,200 bps
16 15 CONNECT 7200* Connection at 7200 bps
*Appears when the Extended Result Codes configuration option is enabled.
**Appears when the Extended Result Codes configuration option is set for Use_DTE_Rate. This displays the DTE data
rate instead of the line rate.
B