Paradyne 3800PLUS Modem User Manual


 
Index
Index-53980-A2-GB30-20 November 1996
S18 (Test Timeout), 8-37, 13-16
S26 (RTS/CTS Delay), 8-12, 13-16
S36 (Rate Auto Originate), 8-29, 13-16
S37 (Auto Redial), 8-22, 8-30, 13-17
S38 (DTR Continuous Repeat), 8-18, 13-17
S39 (Receive Buffer Disconnect Delay), 8-35, 13-17
S40 (Auto Make Busy), 8-21, 13-17
S41 (Dial Line Rate), 13-18
S43 (Train Time), 8-25, 13-18
S44 (Leased Line Rate), 8-23, 8-28, 13-19
S45 (Leased Line Transmit Level), 8-29, 13-19
S46 (Bad Lines Auto Originate), 8-29, 13-19
S47 (Auto Dial Standby), 8-30, 13-20
S48 (Leased-Line Carrier On Level), 8-30, 13-20
S49 (Transmit Buffer Disconnect Delay), 8-35, 13-20
S51 (DTE Remote Loopback), 8-37, 13-20
S52 (DTE Local Loopback), 8-37, 13-20
S53 (V.54 Address), 8-38, 13-21
S54 (V.54 Device Type), 13-21
S55 (Access from Remote), 8-40, 13-21
S56–S59 (Remote Access Password), 8-40, 13-21
S61 (CT111 Rate Control), 8-13, 13-21
S62 (V.25bis Coding), 8-17, 13-22
S63 (V.25bis Idle Character), 8-18, 13-22
S64 (V.25bis New Line Character), 8-18, 13-22
S66 (NMS Call Messages), 8-41, 13-22
S67 (Directory Location 1 Callback), 8-40, 13-22
S69 (Make Busy Via DTR), 8-22, 13-22
S74 (Network Position Identifier), 8-41, 13-23
S75 (Network Management Address), 8-40, 13-23
S76 (Autorate), 8-24, 13-23
S77 (DTR Alarm Reporting), 8-41, 13-23
S78 (Automode), 8-24, 13-23
S80 (No Data Disconnect Trigger Signal), 13-24
S82 (Autorate), 8-28, 13-24
S83 (MI/MIC Dialing), 8-22, 13-24
S84 (AT Command Mode), 8-17, 13-24
S85 (Fast Disconnect), 8-20, 13-24
S88 (Straps When Disconnected), 8-39, 13-25
S89 (V.42 ARQ Window Size Increase), 13-25
S90 (DTE Rate = VF Rate), 8-13, 13-25
S91 (Cellular Enhancements), 8-36, 13-25
S92 (V.29 Train On Data), 13-26
S93 (Cellular RJ11 Adapt), 8-41, 13-26
SDCP (Shared Diagnostic Control Panel), 3-1
SDU (Shared Diagnostic Unit), 3-1
secondary channel, 10-2
Security branch, 11-4
Security configuration options, 8-42
security messages, 4-7
Self (Test branch), 7-2
self-test, 7-2
Send Break Control, 8-35
serial number, 13-4
Service Line, 9-3
Set Access Control, 11-4
Set Administrative Password, 11-10
Set Answer Security, 11-8
Set Originate Security, 11-9
setting factory defaults, 4-11
Speaker Control, 8-39, 9-2
Speaker Volume, 8-40
status, 4-7
Status branch, 6-1
status indicators, 4-2
Stop Bits, 8-8
store telephone number (&Z), 13-11
Straps When Disconnected, 8-39
T
technical specifications, D-1
telephone interface, D-3
telephone numbers, entering, 5-5
Test branch, 7-2
Test Timeout, 8-37
tests (&T), 13-11
top-level menu, 4-7
Train Time, 8-25
Transmit Buffer Disconnect Delay, 8-35
Transmit Clock Source, 8-13
transmit level, D-3
dial, 13-9
leased line, 13-19
troubleshooting, C-1
U
UNIX, G-1, G-2
upgrade instructions, 9-6