Filter
Top Products
COMSPHERE 3800Plus Modems
11-10 November 1996 3980-A2-GB30-20
Set Admin PsWd
Set
Administrative Password is used to change the
Administrative Password value. The Administrative
Password is an 8-digit decimal number that allows
authorized users to enter the Access Security Control
function.
NOTE
If this value is forgotten, then the
only way to access any of the
security functions is by selecting
Reset Security. This restores the
password to a known value*, but
erases the contents of the
modem’s security database.
To
change the Administrative Password, make the
following selections:
F1
Set Access Ctrl <
Set_Admin_PsWd
F2
F3
Press until Set_Admin_PsWd appears.
Select Set_Admin_PsWd.
F1
Set Admin PsWd
Ent " 0
0000000
F2
F3
The
Administrative Password appears.
Press the F2 ("
) key to increment password values.
Press the
key to move the cursor to the next
position. Continue this sequence until the new password
value is entered.
Press the F1 key to save the new password value.
Reset Security
Reset Security is the second major function within the
Security branch of the Top-Level menu. It erases all
contents of the security database table and resets all index
locations to Cleared. T
wo selections appear under Reset
Security: Abort Security Reset and Erase All PassWords.
Use Reset Security if you want to redo the entire security
database table.
CAUTION
This function can be used as
a last resort if the
Administrative Password is
no longer known. This
function causes the
Administrative Password to
default to the Reset Default
password, and erases the
contents of the database
table.
To
reset security
, make the following selections:
F1
Security: <
Reset_Security
F2
F3
From the Security branch, press until
Reset_Security appears.
Select Reset_Security
.
F1
Reset Security >
Abort_Sec_Reset
F2
F3
To
abort this function, select Abort_Sec_Reset.
Nothing is erased and the LCD returns to the main
security display
.
* This value appears as a single number on the last page of this document.