Filter
Top Products
COMSPHERE 3800 Series Modems
10-2 November 1996 3810-A2-GB30-20
Speaker
Speaker allows you to make temporary adjustments to
the modem’
s speaker volume. Upon a reset, speaker
volume returns to its configured setting. For more
information on speaker settings, refer to the Misc
section
in Chapter 9.
To access Speaker from the Control branch, make the
following selections:
F1
Control : >
Speaker Reset
F2
F3
Select Speaker.
F1
Speaker Control : >
Off Low Med
F2
F3
Press the key and appropriate function keys to
choose the desired selection.
DCP selections are
Off Turns the speaker off.
Low
Adjusts speaker to low volume.
Med
Adjusts speaker to medium volume.
High
Adjusts speaker to high volume.
Command Complete
appears on the LCD.
To exit Speaker and remain in the Control branch,
press the
key
. To exit and return to the Top-Level
menu, press the
key
.
AT Command Equivalent
The
A
T commands for ON/Of
f are M0, M1, and M2.
The AT commands for volume control are L0, L1, L2, and
L3.
Reset
Reset causes the modem to stop operation and perform
a complete program restart. The modem begins the
power
-up test sequence that ends with the T
op-Level
menu displayed on the LCD. Configuration options stored
in an Active (Saved) configuration area are copied to the
Active (Operating) configuration area.
T
o access Reset from the Control branch, make the
following selection:
F1
Control : >
Speaker Reset
F2
F3
Select
Reset.
F1
Reset
F2
F3
Reset
appears before the modem performs the
power
-up diagnostic test sequence.
AT Command Equivalent
The
A
T command for Reset is Z.