Filter
Top Products
AT Command Set and S-Registers
14-153810-A2-GB30-20 November 1996
S-Register List
S-registers affect the operating parameters of the
3800 Series modems. S-registers are only applicable when
the DTE Dialer Type configuration option is set for AT.
(See &Mn command.)
Table 14-2 lists all S-registers supported by the
3800 Series modems. The first column lists the S-register.
The second column lists all possible values for that
register
. The third column lists the key sequence used to
enter the equivalent from the front panel. Use this column
to reference commands in Chapter 9 if further description
is necessary
.
S-Register Format
S-registers can be displayed and/or modified when the
modem is in Command mode. To display the value of an
S-register, issue the following command:
TYPE: ATSn ?
Where: n is the register number
PRESS: Enter
To modify the value of an S-register
, issue the
following command:
TYPE: ATSn=r
Where: n is the register number
, and
r
is the new
value
PRESS: Enter
In Table 14-2, the value for n is listed in the S-register
column, and the value for
r
is listed in the Description
column.