Filter
Top Products
Index-13810-A2-GB30-20 November 1996
Index
A
A/ (Repeat Last Command), 14-3
Abort (Test branch), 8-2
ac power
connection, 2-7
requirements, D-2
Access from Remote, 9-43
Access From Remote (S55), 14-22
Active (Operating) configuration area, 9-1
Active (Saved) configuration area, 9-1
Administrative Password, 12-5, 12-10
Answer, 5-3
Answer Access security, 12-2
Answer Access Security Mode, 9-47
Answer Security, 12-8
ARQ Window Size Increase, 14-26
Async Mode (&M, &Q), 14-10
AT Command Mode, 9-18
AT Command Mode (S84), 14-25
AT commands
IH (V.42bis Compression), 9-35, 14-14
&C (LSD Control), 9-13, 14-7
&D (DTR Action), 9-10, 14-7
&F (Factory Defaults), 14-7
&G (V.22bis Guard Tone), 9-27, 14-8
&I (Dial Transmit Level), 9-27, 14-9
&J (Dial Transmit Type), 9-27, 14-9
&L (Leased Mode), 9-29, 14-9
&M (Async/Sync Mode and DTE Dialer Type), 9-8,
9-15, 14-10
&Q (Async/Sync Mode and DTE Dialer Type), 9-8,
9-15, 14-10
&R (RTS Action), 9-11, 14-10
&S (DSR Control), 9-11, 14-10
&T (Test), 14-11
&T0 (Abort Test), 8-2
&T1 (Local Analog Loopback), 8-3
&T2 (Pattern Test), 8-7
&T3 (Local Digital Loopback), 8-5
&T4, &T5 (Receive Remote Loopback Response),
9-40
&T6 (Remote Digital Loopback), 8-4
&T9 (Self-Test), 8-2
&V (View Configuration Options), 14-11
&W (Save to Memory), 14-11
&X (Transmit Clock Source), 9-13, 14-11
&Z (Store Telephone Numbers), 5-6, 14-11
%A (Error Control Fallback Character), 9-36, 14-13
%B (Modulation/Data Rate), 14-13, 14-14–14-16
%C (MNP5 Compression), 9-35, 14-14
%R (Sets DTE Rate), 14-14
\A (Maximum Frame Size), 9-39, 14-12
\C (Error Control Negotiate Buffer), 9-36, 14-12
\D (CTS Control), 9-12, 14-12
\G (Modem-to-Modem Flow Control), 9-37, 14-12
\K (Break Buffer Control, Send Break Control, Break
Forces Escape), 9-16, 9-38, 14-12
\N (Error Control Mode), 9-35, 14-12
\Q (Flow Control of DTE, Flow Control of Modem),
9-36, 9-37, 14-13
\T (No Data Disconnect Timer), 9-23, 14-13
\X (XON/XOFF Passthrough), 9-37, 14-13
A (Answer Mode), 5-3, 14-3
B (CCITT/Bell Mode), 14-3
D (Dial), 5-6, 14-3
DS (Dial Stored Number), 5-2, 14-4
E (Command Character Echo), 9-16, 14-4
echo, C-2
format, 14-3
H (Hook Switch Control), 5-3, 14-4
I (Identification), 7-3, 14-5
L (Speaker Volume), 9-43, 14-5
list of, 14-2
M (Speaker Control), 9-42, 14-5
O (Online mode), 14-5
Q (Result Codes), 9-17, 14-5
Sr? (Display S-register Value), 14-5
Sr=n (Change S-register), 14-5
using to change factory presets, 4-13
V (Result Codes Format), 9-18, 14-6
X (Extended Result Codes, Dial Tone Detect, Busy
Tone Detect), 9-17, 9-20, 9-21, 14-6
Y (Long Space Disconnect), 9-22, 14-6
Z (Reset and Load Active), 14-6
AT Escape Character, 9-16
Auto Dial Standby, 9-33
Auto Dial Standby (S47), 14-21
Auto Make Busy (S40), 14-19
Auto Originate, 14-20
Auto Redial, 9-32
Auto Redial (DTR), 14-18
Auto Redial (Leased Line), 14-18
Auto-Answer Ring Number (S0), 14-16
Auto-Answer Ring Count, 9-20
Automatic Firmware Download Center, 10-6