Paradyne 3810 Network Card User Manual


 
COMSPHERE 3800 Series Modems
9-6 November 1996 3810-A2-GB30-20
Select
Nxt until RemAccssPasswrd appears.
F1
RemAccssPasswrd
NxtąĄ°0
0000000
F2
F3
Select the F2 (°
) key to increment password values.
F1
RemAccssPasswrd
NxtąĄ°0
0000000
F2
F3
Press the
key to move the cursor to the next
position.
F1
RemAccssPasswrd
NxtąĄ°12345678
F2
F3
Continue this sequence until you have entered the new
password value.
T
o save the new password to a configuration area,
make the following selections.
F1
RemAccssPasswrd
NxtąĄ°12345678
F2
F3
Press the
key to scroll up (twice).
F1
Choose Function
Edit Save
F2
F3
Select
Save.
F1
Sav EditArea to >
Active (Saved)
F2
F3
Select a configuration area (Active (Saved),
Customer 1, or Customer 2) to save the changes.
Select the key to exit to the Top-Level menu or
select the
key to remain in the Configure branch.
Summary
When using the DCP to edit configuration options,
keep the following in mind:
Nxt has two functions. First, it indicates that more
configuration options are available within that
group. These are accessed by selecting Nxt
(pressing F1) and scrolling down to the next
configuration option. Second, it indicates that what
is displayed on the LCD is the current setting. If
you scroll left or right, Nxt disappears and
reappears if a new value is selected.
End
appears when you have scrolled down to the
last configuration option available in that group.
Selecting End returns you to the top of the
configuration group. You are free to enter that
group again or scroll left or right to the next
configuration options group.
The
key takes you one step up in the Configure
branch each time it is pressed.
The
key causes you to exit the Configure
branch and return to the Top-Level menu. If any
changes are made to configuration options, the DCP
allows you to save these changes to either the
Active (Saved), Customer 1, or Customer 2
configuration areas.
The
and
keys move selections across the
LCD.
The function keys (F1, F2, F3) select the LCD
choice that appears above that function key
.