Paradyne 3810 Network Card User Manual


 
11-13810-A2-GB30-20 November 1996
Remote Branch
Overview 11-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote Branch 11-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overview
The Remote branch of the Top-Level menu allows you
to control the remote modem’
s DCP using the local
modem’
s DCP
. This function allows you to change
configuration options and control test functions in a
remote modem. Any changes made to configuration
options while using the Remote branch are not saved until
you exit the Remote branch. This function is only
available when using either V
.32bis, V
.32, V.33, or V.29
modulation schemes.
Remote
Secondary Prim (data blckd)
(ExitRem appears
instead of Remote
when using Remote
Mode)
Tlk/Data Status Test Configure Control
“Status”
494-13090-02
Call_Setup Security
11