Filter
Top Products
Configure Branch
9-53810-A2-GB30-20 November 1996
The Configure branch consists of the following three
levels:
•
Ld EditAr
ea frm.
Allows the selection of the
Active (Operating), Active (Saved), Customer 1,
Customer 2, and Factory configuration areas.
• Choose Function.
Allows you to make changes
(Edit) to existing configuration options or write
(Save) these changes to either the Active (Saved),
Customer 1, or Customer 2 configuration area.
• Edit Strap Group.
Contains the eight software
configuration option groups that determine how the
modem operates.
Editing and Saving a Configuration Option
The
following example shows how to change the
Remote Access Password using the DCP
. (If you ever
intend to access another 3800 Series modem via the
Remote branch of the Top-Level menu, the Remote
Access Password must be the same for both modems.) By
following these procedures you learn how to load a
factory preset configuration area (in this case, Async
Dial), how to edit a configuration option (Remote Access
Password), and how to save changes to a configuration
area (Active (Saved)). The shaded key indicates what key
to press.
F1
Idle : 19.2
Test Configure
F2
F3
Select Configure from the Top-Level menu.
F1
LdEdit Areafrm >
Activ (Operating)
F2
F3
F1
LdEdit Areafrm <
Activ (Operating)
F2
F3
Select the Factory configuration area.
F1
Ld Fact Preset : >
Async_Dial
F2
F3
Select
Async_Dial.
F1
Choose Function
Edit Save
F2
F3
Select Edit.
F1
Edit StrapGroup >
DTE_Interface
F2
F3
F1
Edit StrapGroup <
Tests Misc
F2
F3
Scroll
across the LCD and select the Misc
configuration options group.
F1
StrapsWhenDisc >
Nxt No_Change
F2
F3
F1
RemAccssPasswrd
NxtąĄ°0
0000000
F2
F3