Filter
Top Products
Call Setup Branch
5-33810-A2-GB30-20 November 1996
Disconnect
Disconnect allows the modem to go on-hook (hang
up). Use this function when you want to disconnect an
established call on a dial line.
NOTE
When the Model 3820 is
configured for leased-line
operation, this function is not
available and is not displayed on
the LCD.
To
access Disconnect from the Call Setup branch,
make the following selection:
F1
Call Setup: >
Dial Disconnect
F2
F3
Select
Disconnect.
F1
Disconnect
Command Complete
F2
F3
The modem goes on-hook (hangs up) and the call is
disconnected. This includes any calls being used for dial
backup of leased lines. The
Command Complete
status
message is displayed.
To exit this function and remain in the Call Setup
branch, press the
key
. To exit and return to the
Top-Level menu, press the
key
.
AT Command Equivalent
The
A
T command equivalent for Disconnect is H or
H0.
Answer
Answer allows the modem to go off-hook, generate an
answer tone, and begin the handshaking process with the
calling modem. Use the Answer function when the
Auto-Answer Ring Count configuration option is
disabled. (See the
Line Dialer
section in Chapter 9.)
NOTE
When the Model 3820 is
configured for leased-line
operation, this function is not
available and is not displayed on
the LCD.
To
access Answer from the Call Setup branch, make
the following selections:
F1
Call Setup:
Answer
F2
F3
Press the
key until Answer is displayed. Select
Answer.
F1
Answer
Command Complete
F2
F3
The modem goes of
f-hook and attempts to establish a
connection in Answer mode. The Command Complete
status message appears on the LCD.
To exit this function and remain in the Call Setup
branch, press the
key
. To exit and return to the
Top-Level menu, press the
key
.
AT Command Equivalent
The
A
T command equivalent for Answer is A.