Filter
Top Products
7. Operation and Maintenance
9700-A2-GB20-20 December 2002 7-9
Duplicate DLCI
Number
DLCI entered is not unique
for the frame relay link.
No action is needed; previous
contents of the DLCI number field
are restored.
File Transfer Complete
(Seen at an FTP
terminal.)
A file transfer was
performed successfully.
Switch to the newly downloaded
software. See
Activating Software
on page 7-47.
File Transfer Failed –
Invalid file
(Seen at an FTP
terminal.)
A file transfer was
attempted, but it was not
successful.
Try again, making sure you
type the filename correctly.
Exit the FTP session, or
download another file.
See
Activating Software
on
page 7-47.
Invalid Character (
x
) A non-valid printable ASCII
character has been
entered.
Reenter information using valid
characters.
Invalid date: must be
mm/dd/yyyy
An invalid date was entered
on the System Information
screen.
Reenter the date in the
month/day/4-digit year format.
Invalid date and/or
time
An invalid date or time was
entered on the System
Information screen.
Reenter the date in the
month/day/4-digit year format
and/or time in the
hour:minutes:seconds format.
Invalid time: must be
hh:mm:ss
An invalid system time was
entered on the System
Information screen.
Reenter the time in the
hour:minutes:seconds format.
Invalid – Already
Active
A selected test was already
in progress.
No action is needed.
Invalid Password Login is required and an
incorrect password was
entered; access is denied.
Try again.
Contact your system
administrator to verify your
password.
Invalid Test
Combination
When Start was selected, a
conflicting loopback or
pattern test was in
progress, or was active on
the same or another
interface.
Wait until other test ends and
message clears.
Cancel all tests from the Test
screen (Path:
Main Te st
).
Stop the test from the same
screen the test was started
from.
Limit of six Login IDs
reached
Attempting to enter a new
login ID and the limit of six
login/password
combinations has been
reached.
Delete another login/password
combination.
Reenter the new login ID.
Table 7-3. Device Messages (2 of 5)
Message What It Indicates What To Do