Filter
Top Products
B. SNMP MIBs, Traps, and RMON Alarm Defaults
9700-A2-GB20-20 December 2002 B-3
System Group (mib-2)
This section provides the system description and system object identifier for the
System Group for the FrameSaver DSL device, which is an SNMPv1 MIB.
FrameSaver Unit’s sysDescr (system 1)
The following is an example of the format for the system description (sysDescr
[system 1]) for the NMS subsystem in the FrameSaver DSL device:
PARADYNE DSL FrameSaver; Model:
[model number-C or R]
; S/W Release:
(MM.mm.bb [MM=Major.mm=minor.bb=build] format)
; NAM CCA number:
(hardware version in hhhh-hhh format)
; Serial number:
sssssss
FrameSaver Unit’s sysObjectID (system 2)
The following are the system object identifier (sysObjectID [system 2]), or OIDs,
for the NMS subsystem in the FrameSaver DSL CSU/DSU and router:
Diagnostic Feature Set:
— 9720 CSU/DSU: 1.3.6.1.4.1.1795.1.14.2.4.9.3.1
— 9783 CSU/DSU: 1.3.6.1.4.1.1795.1.14.2.4.9.2.1
— 9788 CSU/DSU: 1.3.6.1.4.1.1795.1.14.2.4.9.4.1
— 9783 Router: 1.3.6.1.4.1.1795.1.14.2.4.11.1.1
— 9788 Router: 1.3.6.1.4.1.1795.1.14.2.4.11.3.1
Advanced SLM Feature Set:
— 9720 CSU/DSU: 1.3.6.1.4.1.1795.1.14.2.4.9.3.2
— 9783 CSU/DSU: 1.3.6.1.4.1.1795.1.14.2.4.9.2.2
— 9788 CSU/DSU: 1.3.6.1.4.1.1795.1.14.2.4.9.4.2
— 9783 Router: 1.3.6.1.4.1.1795.1.14.2.4.11.1.2
— 9788 Router: 1.3.6.1.4.1.1795.1.14.2.4.11.3.1
NOTE:
The Diagnostic Feature Set OID appears until the Advanced SLM Feature
Set is activated from the OpenLane SLM system.