Filter
Top Products
4. Configuration Options
4-26 December 2002 9700-A2-GB20-20
Bc
Possible Settings:
–
9783:
0 – 2320000
–
9788:
0 – 2312000
Default Setting: 0
Allows you to display or change the DLCI’s committed burst size.
Display Conditions
– This option appears only when Committed Burst Size is set
to Other.
0 –
maximum
– Specifies the DLCI’s committed burst size.
Excess Burst Size Be (Bits)
Possible Settings:
–
9783:
0 – 2320000
–
9788:
0 – 2312000
Default Setting:
–
9783:
2320000
–
9788:
2312000
Specifies the maximum amount of data in bits that the network may accept beyond the
CIR without discarding frames.
Display Conditions
– This option appears only when Committed Burst Size is set
to Other.
0 –
maximum
– Specifies the DLCI’s committed burst size.
Outbound Management Priority
Possible Settings: Low, Medium, High
Default Setting: Medium
Specifies the relative priority for management traffic sent on management PVCs on this
DLCI to the network.
Low – Management data configured for the DLCI has low priority.
Medium – Management data configured for the DLCI has medium priority.
High – Management data configured for the DLCI has high priority.
Table 4-11. Circuit Records Options (3 of 3)