Filter
Top Products
B. SNMP MIBs, Traps, and RMON Alarm Defaults
B-12 December 2002 9700-A2-GB20-20
enterpriseLatency-
Restored(121)
ifIndex (RFC 1573)
devLastTrapString
(devHealthAndStatus.-
mib
An IP SLV latency value has gone
back below a threshold for a
particular Class of Service for a
path.
String:
‘Latency restored
xxx.xxx.xxx.xxx
,
COS
nn
,
DLCI
nnnn
’
enterpriseMissed-
SLVDown(16)
devFrExtDlciIfIndex
(devFrExt.mib)
devFrExtDlciDlci
(devFrExt.mib)
devFrExtDlciMissedSLVs
(devFrExt.mib)
devLastTrapString
(devHealthAndStatus.mib)
SLV Timeout Error Event
Threshold has been exceeded.
String:
‘SLV down on $ifString due to
excessive SLV packet loss. Total
SLV packets lost is $numLost.’
enterpriseMissed-
SLVUp(116)
SLV Timeout Error Event has been
cleared.
String:
‘SLV up on $ifString because
SLV communication was
reestablished. Total SLV packets
lost is $numLost.’
enterprisePath-
Down(19)
ifIndex (RFC 1573)
devLastTrapString
(devHealthAndStatus.-
mib
A path on the network interface
has become unavailable.
String:
‘Path
xxx.xxx.xxx.xxx
Down, DLCI
nnnn
’
enterprisePath-
Up(20)
ifIndex (RFC 1573)
devLastTrapString
(devHealthAndStatus.-
mib
A path on the network interface
has become available.
String:
‘Path
xxx.xxx.xxx.xxx
Up,
DLCI
nnnn
’
enterpriseRmon-
ResetToDefault(13)
devLastTrapString
(devHealthAndStatus.mib)
All RMON-related option changes
have been reset to their default
values.
Default Factory Configuration
settings have been reloaded,
returning RMON-related options to
their original settings.
String:
‘RMON database reset to defaults.’
enterpriseSelfTest-
Fail(2)
devLastTrapString
(devHealthAndStatus.mib)
Unit has completed
(re)initialization and a hardware
failure was detected.
String:
‘Self test failed: $
s
.’
($
s
is the contents of
devSelfTestResult.)
Table B-7. enterprise-Specific Traps and Variable-Bindings (2 of 3)
Trap Variable-Bindings Possible Cause