Filter
Top Products
8. Troubleshooting
8-30 December 2002 9700-A2-GB20-20
Lamp Test
The FrameSaver device supports a Lamp Test to verify that all LEDs are lighting
and functioning properly. All LEDs flash or blink on and off at the same time every
1/2 second during execution of the test. When the test is stopped, the LEDs are
restored to their normal condition.
Main Menu Te st Lamp Test
If the Test Timeout configuration option is enabled and a Test Duration is set, the
Lamp Test stops when the test duration expires. See
Test Timeout Feature
on
page 8-16 for additional information.